|
Using 2.6.x kernel build system.
make: Entering directory /tmp/vmware-config3/vmci-only' make -C /lib/modules/2.6.32-279.1.1.el6.i686/build/include/.. SUBDIRS=$PWD SRCROOT=$PWD/. modules make[1]: Entering directory/usr/src/kernels/2.6.32-279.1.1.el6.i686'
CC [M] /tmp/vmware-config3/vmci-only/kernelStubsLinux.o
In file included from /tmp/vmware-config3/vmci-only/kernelStubs.h:35,from /tmp/vmware-config3/vmci-only/kernelStubsLinux.c:28:
/tmp/vmware-config3/vmci-only/vm_basic_types.h:108:7: warning: "FreeBSD" is not defined
CC [M] /tmp/vmware-config3/vmci-only/vmciDatagram.o
In file included from /tmp/vmware-config3/vmci-only/vmciDatagram.c:42:
/tmp/vmware-config3/vmci-only/vm_basic_types.h:108:7: warning: "FreeBSD" is not defined
In file included from /tmp/vmware-config3/vmci-only/vmci_kernel_if.h:41,from /tmp/vmware-config3/vmci-only/vmciDatagram.c:45:
/tmp/vmware-config3/vmci-only/compat_wait.h:78: error: conflicting types for apoll_initwaita
include/linux/poll.h:70: note: previous declaration of apoll_initwaita was here
In file included from /tmp/vmware-config3/vmci-only/vmci_queue_pair.h:36,from /tmp/vmware-config3/vmci-only/vmciGuestKernelAPI.h:43,from /tmp/vmware-config3/vmci-only/vmciUtil.h:33,from /tmp/vmware-config3/vmci-only/vmciDatagram.c:48:
/tmp/vmware-config3/vmci-only/vm_atomic.h:329:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:333:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:401:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:407:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:506:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:595:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:684:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:773:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:775:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:860:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:862:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:945:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:947:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:1028:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:1030:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:1223:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:1227:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:1536:7: warning: "_MSC_VER" is not defined
/tmp/vmware-config3/vmci-only/vm_atomic.h:1663:7: warning: "_MSC_VER" is not defined
make[2]: [/tmp/vmware-config3/vmci-only/vmciDatagram.o] Error 1
make[1]: [module/tmp/vmware-config3/vmci-only] Error 2
make[1]: Leaving directory /usr/src/kernels/2.6.32-279.1.1.el6.i686' make: *** [vmci.ko] Error 2 make: Leaving directory/tmp/vmware-config3/vmci-only'
Unable to build the vmci module.
The communication service is used in addition to the standard communication
between the guest and the host. The rest of the software provided by VMware
Tools is designed to work independently of this feature.
If you wish to have the VMCI feature,you can install the driver by running
vmware-config-tools.pl again after making sure that gcc,make and the
kernel sources for your running kernel are installed on your machine. These
packages are available on your distribution's installation CD.
[ Press Enter key to continue ]
No X install found.
Checking acpi hot plug [ OK ]
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [ OK ]
Guest operating system daemon: [ OK ]
The configuration of VMware Tools 2.0.0 build-122956 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an X server session.
You will need to either manually start /usr/bin/vmware-user or log out and log
back in to this desktop session to obtain the following features: guest
resolution fit,drag and drop,and file and text copy/paste. vmware-user is
configured to automatically start at a graphical login,but that won't take
effect until the next login.
Enjoy,--the VMware team
As always if you need any help you can reach us on twitter @ehowstuff or drop us a comment below. （编辑：衡阳站长网）
【声明】本站内容均来自网络，其相关言论仅代表作者个人观点，不代表本站立场。若无意侵犯到您的权利，请及时与联系站长删除相关内容!
|
